What is the process to install a wall mount stainless steel hood?

Kitchen owners are increasingly becoming concerned about the well-being of their staff. Therefore, stainless steel hoods are becoming increasingly popular among hospitality entrepreneurs and chefs. In addition to significantly increasing the quality of your pantry, they also improve the purity of your surroundings. They expel smoke and other contaminants from your workspace and either send that impurity out of your surroundings or use the charcoal filters to recirculate the air back into your kitchen. Today, we'll discuss how to install a wall-mount range hood. If you are more interested in establishing an under-cabinet or island mount canopy, these steps will be pretty different while discussing setup. While shopping for the product, you may be overwhelmed by all the diverse styles and models, but it is better to focus on what you need. It would be best to focus primarily on CFM, size, and type factors.

Remember that your premium offering’s dimension should be similar to your range. However, it could be slightly larger or smaller. Once sorted, select a style that suits your kitchen aesthetic: wood, stainless steel, copper, or other kinds. Lastly, choose a variant with a CFM that is almost twice the square foot measurement of your pantry. It is not only straightforward to perform this installation yourself but can also save you hundreds or thousands of dollars. With our easy-to-follow steps and informational points, you'll have your new equipment ready in no time.

If you are concerned about the budget of the equipment, don’t be. Simco offers an exhaustive collection of low-cost products, such as Steel Benches with Splashback. Go to the Simco website for more details on the product.

What are the Tools you Need for Setup?

  • Power Drill
  • Twist Drill Bits
  • Reciprocating Saw
  • Angle Grinder
  • Grinder Blades
  • Screwdriver Set
  • Caulking Gun
  • Tape Measurer
  • Level

What are the Things you Require for Installation?

You will need the following materials:

  • Exterior Vent Hood
  • Foam Insulation Spray
  • Masking Tape
  • A Magic Marker
  • Screws
  • Plastic Flexible Ducting. This item may be included and differs according to diverse brands.
  • Wall Plugs (Optional)
  • Safety Glasses (Recommended)
  • Twist Ties. You can also use the canopy’s cord

Parts of the Setup Process

Begin Your Measurements

The first step to be recommended is to measure the entire height of your ceilings. In addition, you also need to decide on the closeness between your ventilation canopy and the kitchen equipment. Comprehending your ceiling height will give you an idea of whether to buy a premium chimney extension or a short kit. Many designers can't decide on the clearance distance between your appliances and the canopy. It is advised to place your hood within 30-36" above the top of your range. You can consult the matter by contacting Simco – the leading stainless steel hoods supplier in Melbourne & Sydney.

Simco also promotes a host of items in other segments. One of the examples is Single Sink Bench. For more information, visit the Simco website.

Installing Your Exterior Vent Hood

Once you have measured all the required dimensions for your prospective setup, following the four steps below is recommended for an effortless & efficient installation.

  • It is advised to create an outline of how the premium equipment will look on your wall using masking tape. You don't have to measure the dimensions precisely and only need to visualise the look of your range covering once you set it up. Therefore, you can make changes to the product before it is installed if you want to tweak something.
  • Once the first step is done, cut out a hole in your wall to lead outside your kitchen by starting your venting setup. If you are ducting through the roof, you must take the help of an experienced specialist in this field. Mark the part of your stainless steel hood tubing connected to your outer duct canopy with a marker pen on the inner part of your pantry. Drill holes through your division using drill and drill bits until you see the light on the opposite side. Ensure to make as many holes as you require so that there is no issue connecting these holes when you reach the outside of your pantry.
  • Now, use your reciprocating saw to start cutting out the hole. While wearing safety glasses, go outside your house and cut the circle you made with your holes as neatly as possible. Once you get the circular part, put your outer duct covering’s steel tubing in the space. It is advised not to start installing it immediately. You'll probably have some additional tubing protruding or not enough tubing unfurling into your galley, but this is an easy fix.
  • You can buy the items at a local hardware store and attach them with sheet metal screws and duct tape if you need an extension. If you wish to remove excess, use your tape measure to see how many additional parts are required to be cut. Once done, mark it using a magic marker. You can also utilise your angle grinder to cut this excess. Once removed, install the exterior vent hood with screws and caulk the edges and screws to stop any leaking or rusting. Contact Simco – the foremost stainless steel hood manufacturer and distributor in Brisbane & Perth, for more information.

https://simcogroup.com.au/blog/post/what-is-the-process-of-maintaining-an-exhaust-hood-canopy

Setting up the Stainless Steel Hood

Once you have taken care of the challenging part, you can continue setting up your hood. Check the size of the drill holes at the top of the canopy and put dots on the wall centred over where you will set your product and the hole you cut a few moments earlier. Use the hammer softly to put the wall plugs into the space and eliminate additional parts. Tighten the screws available with your premium product into the wall plugs. However, ensure not putting them all the way. You can hang your canopy on the screws and make necessary tweaks before installing it on the wall. You can attach it to the wall once you’re happy with its positioning, you can attach it to the wall.

Setting up your Venting & Chimney

Surround the steel tubing with your exterior vent hood by employing foam insulation spray. Once done, secure one end of your plastic flexible ducting by taking it. Fasten one end into the canopy and the other end into the metal tubing attached to the outer duct of the stainless steel hood. Feel free to use a box cutter or a knife to make a clean cut if you need to remove this ducting. Once the process mentioned above is completed, you can start installing the chimney by plugging it into your range cover. In most circumstances, you can only make the chimney fit into the space between your canopy and the roof by cutting the vent. Measure the dimension of your desired chimney size by using a measuring tape. Once done, then cut the chimney to size using your angle grinder.

Line up the screws you created at the top of your offering with the mounting flange given to you with your range hood while employing a tape or level measure. Fasten the mounting flange to the roof and arrange your chimney into a proper place. Once you fasten all the screws, you have successfully installed your premium equipment.

We also contribute to transforming your kitchen into a better place with an extensive catalogue of Exhaust Hood Canopies. Visit the website of Simco for more details.