Spills in your pantry do not always happen due to your dishwasher or basin. The truth is that your commercial refrigeration device can be leaking from various areas. You must immediately take care of this issue, especially if the leakage has spilled onto the surface. There is a reason why such spills are considered a risk. Water on your kitchen floor is a slipping hazard and can put anyone at risk of experiencing electric shock when it comes in contact with water and electrical outlets. Since there are different brands and types of refrigerators, these troubleshooting tips will address the various problems your refrigerator may be experiencing. Consulting your manufacturer's cooling device manual will serve as a tool for fixing your appliance.

Front of the Fridge's Lower Portion

Suppose the leakage occurs from the front portion of your fridge's lower section. In that case, this fact typically implies that your equipment is a "self-defrosting" variant resulting in choking the drain line. You can find drain/liquid wire replacement parts in the market or online.

Top-Mounted Solid Door Freezers is another fantastic piece of equipment apart from the one mentioned here and also known for low expenses. You can keep food ingredients at adequate temperatures due to the high-quality device on top. You can buy the product by going to Simco's official webpage.

Remedial Process:

  • Unplug your commercial refrigerator.
  • Take out the plastic guard situated on the fridge's front side.
  • Remove plastic tray; generally slides out of the compartment
  • Locate the end of the drain line
  • Drain line into an empty bucket
  • Take out the top portion of the drain tube; inspect for any chunks of ice that may be clogging the pipe.
  • If ice is found, run a drainage line under hot liquid to melt chunks
  • Once the clog is cleared, reinstall the drain wire.

Very Bottom of Refrigerator

If a leak comes from your fridge's bottom part, this generally means that there is a hole/crack in the bottom of the drip pan. The drip pans in your refrigerator catch excess liquids following the regular defrost cycle in the freezer section of your refrigerator. If you want a replacement part, search online or in the market. You can also find some fridge drip pans installed right on the compressor.

Remedial Process:

  • Locate your refrigerator's drip pan.
  • Visually inspect the pan for cracks or holes.
  • If any accident has ruined your drip pan, it is crucial to check out a replacement component immediately.
  • If there is no visible damage, ensure the pan is positioned correctly. For further information, visit the web page of Simco – the leading commercial refrigeration supplier in Melbourne & Sydney.

Rear Part of the Appliance

A stream of water coming from your fridge backside through the water line or valve is the cause of the issue most of the time. 

Remedial Process:

  • Check the valve only after taking out the refrigerator plug. 
  • Ensure checking the connected line from the fridge’s bottom to the back of the freezer.
  • The leak can also happen due to the solenoid that opens and shuts the water valve. This component expands and shuts the ice chute door on the ice generator. You can order a replacement part by visiting web portals or physical stores.
  • The valve turning the water on & off for the beverage dispenser & ice maker can also be the reason for a leak if there is a hole or crack in it.
  • Check any line where water flows for holes/cracks or has become disconnected from the outlet.
  • You can search for replacement parts if your water inlet valve is damaged.

Inside of Refrigerator

If your device is spouting water from the internal parts, then the choking of the drain line is the most likely reason. These lines are typically integrated behind the small drawers of commercial fridges. As mentioned earlier, you can find replacement parts in any nearby store.

Remedial Process:

  • Locate crisper drawers.
  • Remove the two drawers from the refrigerator and find the drain line outlet.
  • Check out the internal part of a drain opening using a hand-held mirror; look for any particle that may be blocking the outlet.
  • If you can not find anything, take out the drain line from the other spectrum and spew water into the opening so it will come out on another side through the drain line.
  • This potentially adequate water flow should eliminate any debris that may be choking the tube.
  • If water does not seem to do the trick, feed a mini plumber's snake through the tube to ensure the clog is cleared.
  • Once the clog is removed, reassemble the drain connectivity and periodically check for leaks.

Apart from the titular item, one appliance that needs continuous maintenance is the Square Glass Cake Display, a crucial component of every café and food establishment. Go to the Simco website for more information on the product.

Bottom (Inside) Fridge

Faulty door gaskets usually cause a leak coming from the bottom of the inside of your refrigerator. Air entering your refrigerator through worn/ripped door gaskets causes excess moisture in your fridge to drip down and overfill the drip pan. The drip container will trickle down onto your pantry floor when it is filled with water. Such water outflow can also happen due to a faulty door gasket. If your door gasket becomes encrusted with debris or food is stuck in the refrigerator door's cracks, then the door will not be able to close correctly. You can visit Simco – the foremost commercial refrigeration supplier in Brisbane & Perth – for more clarity.

Remedial Process:

  • Check device drain gaskets and drawers for any deterioration or accumulation.
  • Be sure that your refrigerator door completely shuts when closed. Non-closing of the door may damage it significantly. 
  • You can also ensure that the nuts & bolts that keep the fridge door mounted are tightened and secure.
  • If you think that the primary cause of concern is door gaskets, you must order the best-quality replacement parts.