Most commercial kitchens prefer gas cooktops since they offer an equal heat allotment which is not always the case with electric ovens. It can be challenging to set up this equipment in your kitchen, and you must leave the job to a certified professional. It would be better if you had the contact of a licensed fitter and technician to install this premium machinery. The main reason for having an experienced person on the job is following a set of security precautions while setting up a gas appliance. It is a specialist’s job as one needs comprehensive knowledge along with some tools like a wrench, screwdriver, gas pipe and sealant gel for the pipe joints.

What are the Requirements for Cooktop Clearance?

When an organisation selects a commercial gas range, the needed clearance of combustible materials is one essential consideration. You must adhere to minimum clearance procedures to safely install a gas stove, which is put in place by authorities to avoid fire-related hazards and other safety emergencies. You can follow the required clearances by adhering to the following requirements according to the Australian standard:

  • Must be at a vertical distance of 600mm from a flammable surface
  • 20mm horizontal clearance from a flammable surface
  • The distance to the exhaust fan must be 750mm.

One of the types of items mentioned here is Commercial Gas Stoves, which are available & applicable for food joints, whether large or small. For more details, visit the Simco website.

Steps for Setup

Take Out the Cooktop in the Kitchen

If your pantry already possesses commercial gas cooktops at present, the primary step is to take them out. Start with switching off the gas supply of the stove at the valve. The electric connection and gas supply pipe are kept right under the gas unit. Loosen and take out the flexible gas line from the brass adapter on the product by using your wrench. Finally, open and remove the brass adapter from the gas pipe of the titular item. You might want to come off from the cut-in for needing to push the gas device. Ensure that you possess the proper instruments for the task. You’ll require a pair of wrenches- one to fit the brass adapter that has been screwed to the cooktop’s gas pipe and one to install the flexible gas line. However, if you install a new unit in your kitchen, it is unnecessary to follow this step.

Make the Countertop Ready

You must first cleanse the countertop and the surroundings around the gas cooktop for installing the device. Remove any old grease or silicone sealant on the edges of the old equipment. Under the following process, you will have to organise the countertop's surface. This procedure may involve making a hole in the countertop for the gas connection and setting up a new countertop.

Check Whether you Can Accommodate the Device in the Given Space.

Slowly drop the premium appliance on the cutout to verify whether your new device fits the cutout. If it sets appropriately in the cutout, you have no issues moving forward to the next step. If your appliance comes with brackets, then you can fit them now.

Bolt the Connector to the Gas Pipe

Using the correct fittings while working with gas connections is essential, as checking whether they are leak-proof. One method to perform this process is by taping the unbevelled end of the connector fitting before screwing on the connector fitting. It is crucial to create a tight seal by using Teflon tape. In addition, it is never advised to tighten nuts onto pipes or black fittings because these have the tendency to leak over time. For more information, visit Simco – the leading commercial gas cooktop supplier in Melbourne & Sydney.

https://simcogroup.com.au/blog/post/4-handy-tips-to-securely-handle-your-commercial-gas-cooktops/

Attach Electrical Supplies if Available

It would help if you attached the electrical supply when installing your gas cooktop. The power cord should be routed so that it will not rub on any sharp edges or obstruct piping or the final lowering of the product into its countertop opening. You must be careful of the probability that the producer of your gas item will determine that the electrical cord must be attached to a properly grounded and wired electrical receptacle. This container is usually placed below the counter and is meant for this objective. It will be best not to tweak the cord and hustle for the grounding connections.

There are numerous varieties of available products, and Gas Char Grills are one of them. These appliances provide a smoky and delicious flavour to your food item. For more information on this item, visit us at Simco. 

Attach Gas Regulator & Gas Supply Lines to The Device

You must use a gas regulator at the bottom of the gas cooktop if you use propane or LPG. You will notice arrow signs on the regulator, which implies that the mentioned side of the regulator should be indicated towards the device. Apply some Teflon-based pipe sealant to fix the regulator. Once done, put the regulator on the line, and tighten it using a wrench. After completing this process, you must integrate the connector that will attach the titular appliance to the LPG cylinder. It would help if you gained further insights by contacting Simco – the foremost commercial gas cooktop supplier in Brisbane & Perth.

https://simcogroup.com.au/blog/post/what-are-the-components-of-a-commercial-gas-cooktop/

Furthermore, always ensure that applying pipe-joint compound to the joint. After completing the procedures mentioned above, it is time to use a wrench to fit the compression pipe. Now, quickly attach the regulator before putting the gas range in the cutout. Optionally, you can bind the line and the regulator after putting the gas cooktop in the cutout.