Commercial refrigeration equipment plays a critical role in many businesses, such as restaurants, grocery stores, and hospitals. However, it can sometimes experience common problems that can cause disruptions and financial losses. This blog post will describe the steps to troubleshoot and diagnose these common problems in commercial refrigeration appliance.

Check the Power Supply

The first and easiest step is to check the power supply of the refrigeration equipment. Ensure that the power cord is properly connected to the electrical outlet and that there is the power to the outlet. If a circuit breaker powers the device, check to see if the breaker has tripped. If the breaker malfunctions, reset it and observe if the unit restarts. If the unit still does not turn on, you may need to call a technician.

If you require top-quality Benchtop Catering Equipment for your food joint that can be long-lasting and efficient, look no further. Visit the official website of Simco today.

Check the Thermostat

The thermostat is a critical component of the refrigeration system. It regulates the temperature inside the unit and turns the compressor on and off as needed. If the temperature inside the unit is not correct, the thermostat may be faulty. To check the thermostat, turn the temperature down to its lowest setting and listen for a clicking sound. If the thermostat is functioning properly, you should hear a clicking noise on turning the temperature control to its lowest setting. If you do not hear a clicking sound, the thermostat may be defective, and you may need to replace it.

Inspect the Condenser Coil

The condenser coil is used to release the heat that is eliminated from the inside of the refrigerator. Over time, the condenser coil can become dirty or clogged with debris, which can reduce its efficiency and cause the unit to overheat. To inspect the condenser coil, unplug the unit and locate the coil at the back or underneath the unit. Eliminate any dust or residue accumulated on the coil using a soft-bristled brush or a vacuum cleaner. This practice will help improve the coil's efficiency and prevent overheating. For further details, visit Simco – the leading commercial refrigeration supplier in Melbourne & Sydney.

Check the Evaporator Fan

The evaporator fan circulates the cool air inside the refrigerator. If the fan is not functioning properly, your refrigerator will find it hard to chill. To check the evaporator fan, listen for any unusual noises when the unit is running. If the fan makes unusual noises, it may be due to worn bearings or a defective motor. If this is the issue, you may be required to change the fan.

Check the Door Gaskets

The door gaskets are responsible for creating an airtight seal between the refrigerator body and the door. If the gaskets are damaged or worn, cold air can escape from the unit, causing it to work more intensely than required to maintain the desired temperature. To check the door gaskets, close the door on a piece of paper and try to pull the paper out. If you can easily remove the paper, the gaskets may be defective and need to be replaced.

Check the Compressor

The compressor is one of the primary components of commercial refrigeration for sale. It is responsible for circulating the refrigerant throughout the system. If the compressor is not working correctly, the refrigerator will not cool properly. To check the compressor, listen for any unusual noises when the unit is running. If you hear a clicking or buzzing sound, the compressor may be defective and need to be replaced.

Call a Professional

If you have gone through all the troubleshooting steps and the unit is still not working correctly, it may be time to call a professional. Refrigeration systems are complex, and it is often best to leave repairs to a trained technician. A professional can check and resolve the problem quickly and effectively. This practice saves you time and money in the long run.

Why is it Important to Properly Maintain the Equipment?

Longer Lifespan

Regular maintenance helps extend the lifespan of your commercial refrigeration equipment. When appliances are well-preserved, they are less likely to break down or require costly repairs. By performing routine maintenance tasks such as cleaning coils, replacing filters, and checking refrigerant levels, you can ensure that your product runs smoothly and efficiently for years to come.

Lower Energy Bills

Regular maintenance can also help reduce energy consumption and lower energy bills. When improperly maintained commercial refrigerator equipment, it can use more energy than required. This issue leads to higher utility bills. For example, dirty coils and filters can cause the system to work harder, which uses more energy. Keeping your equipment clean and well-maintained can reduce energy consumption and save money on your energy bills.

Improved Food Safety

Commercial refrigeration equipment plays a critical role in ensuring the safety of food products. When the equipment is not maintained correctly, it can create an environment where harmful bacteria can grow, leading to foodborne illness. Regular maintenance can help prevent these issues by ensuring that the equipment is running at the correct temperature and that all components are functioning correctly.

Compliance with Regulations

Businesses that store or sell food products are subject to strict food safety regulations. Regular maintenance of commercial refrigeration products is essential to ensure compliance with these regulations. Inability to adhere to the rules can result in fines and legal action, which can be costly for your business. By performing routine maintenance tasks, you can ensure that your appliance meets all relevant standards and regulations.

One of your best bets while purchasing equipment is Stainless Steel Bench. These are sturdy, efficient and long-lasting. For more options, visit the Simco website.

Avoid Costly Repairs

Commercial refrigeration equipment is costly to repair or replace. Regular maintenance can prevent expensive repairs by identifying potential issues early on. For example, if a refrigerant leak is detected and repaired early, it can prevent the compressor from failing, which would require a costly replacement. By addressing issues promptly, you can avoid expensive repairs and increase your equipment's lifespan. You can garner further insights by reaching out to Simco – the foremost commercial refrigeration equipment supplier in Brisbane & Perth.

Improved Efficiency

Regular maintenance can also improve the efficiency of your commercial fridge freezers device. When appliances are well-maintained, they can operate more efficiently, reducing energy consumption and improving cooling performance. This maintenance can also result in a more consistent temperature throughout the unit, reducing the risk of spoilage and enhancing the quality of the food products.